3Racing SAK-D131/FRP Competition FRP Upper Deck  [SAK-D131/FRP]

3RACING Sakura D3 CS SPORT Sakura Zero FRP Upper Deck - SAK-D131/FRP
Price:
USD$3.80
Brand:
3Racing
Model:
SAK-D131/FRP
Condition:
Brand New
Write a review

3Racing SAK-D131/FRP Technical Upper Deck Overview

The 3Racing SAK-D131/FRP FRP Upper Deck is a precision component for the Sakura D3 CS SPORT, fabricated from fibre reinforced plastic to increase torsional rigidity while minimising added mass. This deck is intended for racers and tuners seeking a stiffer top plate to stabilise suspension geometry under load.

Performance and Tuning Benefits

Installing the SAK-D131/FRP reduces chassis twist, improving front to rear load transfer and allowing finer setup choices for camber, toe and roll distribution. The FRP material provides a predictable stiffness curve that aids in consistent lap times and sharper steering response.

Fitment Notes for Tuners

The deck matches the Sakura D3 CS SPORT mounting scheme for direct installation. When fitting, verify torque on fasteners and recheck suspension alignment; small adjustments to damping or anti roll settings may be required to capitalise on the increased stiffness.

How does this deck alter chassis flex characteristics?

The FRP deck reduces mid chassis flex and shifts bending loads away from the centre, resulting in a firmer platform for suspension to operate against, which improves predictability under high cornering loads.

Any setup changes recommended after installation?

Fine tune camber and anti roll balance to reflect the stiffer chassis. Many racers lower rear roll stiffness slightly to retain desirable rotation while using the added top deck rigidity for cleaner turn-in.

Is the SAK-D131/FRP suited to both carpet and asphalt tracks?

Yes. The FRP deck provides a consistent stiffness platform that benefits precise tracks like carpet and asphalt, though damping and tyre choices should be matched to the surface for best results.