3Racing SAK-D651/WH Sakura D6 Sport Racing Gear Set  [SAK-D651/WH]

3RACING KIT-SAKURA D6 SPORT M1.2 x 14 x 34mm_11T (2 pcs)_White - SAK-D651/WH
Price:
USD$3.80
Brand:
3Racing
Model:
SAK-D651/WH
Condition:
Brand New
Write a review

Technical Overview for Sakura D6 Drivetrain

The 3Racing SAK-D651/WH gear set is produced for the Sakura D6 Sport and provides a precision matched pair for drivetrain maintenance and setup work. Each gear measures M1.2 x 14 x 34mm and features 11 teeth, allowing predictable engagement characteristics for lap-by-lap consistency.

Materials and Load Considerations

These gears are made to withstand typical racing forces while preserving gear mesh integrity. The 11 tooth specification helps distribute torque across the tooth face to reduce peak stresses that can lead to tooth deformation under heavy load.

Installation and Setup Recommendations

Fitment is direct on Sakura D6 Sport spindles; technicians should verify concentricity and apply precise mesh settings. After installation, rotate the assembly under hand to detect any binding and recheck bearing preload for optimal performance.

What is the best way to confirm correct mesh under load?

Set a light paper feeler for initial mesh, then run the drivetrain under no power while observing for smooth rotation. For final check, run short low speed laps and inspect for abnormal wear patterns.

Are there recommended shim changes for high torque setups?

High torque motors may benefit from slight increases in bearing preload or revised spacer thickness to maintain alignment. Small incremental changes and dyno or track testing will identify optimal settings.

How do I inspect gears for early fatigue?

Examine tooth roots and flanks for hairline cracks, flat spots or rounding. Track the pattern of wear across runs to determine if material support or mesh needs adjustment.