Auper D6 Service Bulkhead SAK-D6825/BU Gear Drive Replacement by 3Racing  [SAK-D6825/BU]

Price:
USD$71.30
Brand:
3Racing
Model:
SAK-D6825/BU
Condition:
Brand New
Write a review

Service replacement bulkhead for Auper D6

This gear drive bulkhead fits the Auper D6 platform as a replacement-style part. It forms the mounting interface for the gearbox drive area and keeps gearset alignment and bearing positions stable during use and tuning changes.

The bulkhead secures axle and bearing locations that influence backlash and gear mesh. When replacing it, transfer bearings and shims from the old unit and perform a dry fit to confirm clearance before final assembly to avoid binding.

Installation procedure: remove gearbox fasteners in order, move bearings and spacers to the new bulkhead, then secure while checking gear mesh under rotation. Tighten fasteners progressively and verify smooth drivetrain operation.

Specifications

  • Item: Gear Drive Bulkhead
  • Material: unspecified
  • Model Number: SAK-D6825/BU
  • Compatibility: Auper D6
  • Color: Blue

A practical replacement for hobby RC Auper D6 chassis use, intended to restore gearbox alignment and help tune geartrain clearance.

Which components should be transferred during replacement?

Transfer bearings, shims, and any spacers from the original bulkhead to preserve previous mesh settings, unless you are fitting new matched bearings.

Is the colour specified the same as original?

The listing specifies the part as blue; confirm visual match to your chassis if the colour is a concern for appearance or part identification.

What checks are recommended after installation?

After assembly, rotate the drivetrain by hand to detect binding, verify consistent mesh, and make shim adjustments as needed before final tightening.

Does this part require special maintenance?

Routine checks for tightness, bearing wear, and mesh condition are recommended; no special maintenance beyond standard gearbox care is required.