AX10 Scorpion Graphite Servo Mount AX10-19/WO by 3Racing  [AX10-19/WO]

AXIAL AX10 Scorpion Chassis Graphite Servo Plate - 3RACING AX10-19/WO
Price:
USD$7.50
Brand:
3Racing
Model:
AX10-19/WO
Condition:
Brand New
Write a review

Technical Overview

This graphite servo plate is a purpose-made aftermarket reinforcement for the AXIAL AX10 Scorpion chassis. Machined geometry provides a rigid attachment point to lower local flex and improve repeatable steering input during technical crawling sessions.

Intended for model-level installation: relocate the existing servo to the graphite plate using the AX10 Scorpion servo footprint and retain original mounting hardware when compatible. The plate concentrates stiffness at the servo bay to reduce chassis-induced compliance and support finer steering control under load.

Use as a targeted tuning component when you need a low-mass increase in servo-mount rigidity without modifying servo hardware or drivetrain layout.

What installation checks should I perform?

Confirm servo horn clearance and that the servo spline aligns with the linkage. Torque screws to recommended settings and verify there is no binding through the suspension travel.

How does this affect chassis tuning?

By stiffening the servo anchor, steering inputs become less affected by chassis flex. This can refine steering consistency, particularly with soft suspension setups or when using lighter servos.

Are there recommended fasteners?

Use the original AX10 Scorpion mounting hardware where possible. If replacement screws are needed, choose low-profile machine screws that match the original thread and length to avoid interference.