Mini-Z AWD Rear Toe Linkage 3 Degree - AWD-09/3 by 3Racing  [AWD-09/3]

Rear toe linkage for Mini-Z AWD

This is an RC-scale rear toe in/out linkage developed for the Kyosho Mini-Z AWD chassis to replace the factory rear linkage and provide a reproducible 3 degree toe setting. The component is finished in purple and is intended for racers and tuners who require consistent rear geometry while benchmarking setup changes on Mini-Z AWD models.

Functionally the linkage establishes a fixed rear toe baseline so adjustments to corner entry and mid-corner rotation can be compared accurately. Use it to reduce setup variability when testing suspension, tyres or front toe changes.

Installation notes: remove the stock Mini-Z AWD rear toe linkage, transfer any required ball cups or spacers from the original part, and secure the replacement using the original mounting hardware. Ensure correct thread engagement and confirm the linkage articulates freely without binding before track use.

Tuning tips: begin from the stock toe and install the 3 degree linkage to establish a reference. Make incremental changes in rear toe together with front toe and roll centre adjustments, and evaluate results on a controlled surface since small toe changes predominantly affect turn-in and mid-corner rotation rather than straight-line stability.