TA05 Front Geometry Upgrade FF 1 Degree TA05-10/1/LB by 3Racing  [TA05-10/1/LB]

Tamiya TA05 /TA05-R Aluminium Front Suspension Mount ( FF/1 Degree ) - Light Blue Color - 3Racing TA05-10/1/LB
Price:
USD$7.50
Brand:
3Racing
Model:
TA05-10/1/LB
Condition:
Brand New
Write a review

Front suspension mount technical brief

This aluminium front suspension mount is specified for Tamiya TA05 and TA05-R frames and features the FF/1 Degree designation to set a forward 1 degree steering pivot angle. The part is an aluminium geometry piece intended to alter steering pivot behaviour and provide a firmer attachment than the stock polymer mount.

In setup terms the FF/1 Degree orientation adjusts initial steering bias and can change turn-in characteristics; apply it alongside toe, camber, and shim adjustments when refining handling for competition. Treat the component as a precise geometry tool rather than a means to change overall suspension travel.

Assembly guidance for tuners: confirm upper link and knuckle compatibility, check servo saver and tie rod clearances, and verify thread engagement before final torque. Reuse OEM fasteners if they seat correctly and apply measured torque values appropriate to small-scale RC hardware to avoid damage.

How should this mount be integrated into a race setup?

Use the mount as part of a geometry package: pair with measured toe and camber settings, log handling changes, and make incremental adjustments to assess the 1 degree forward bias on lap time and corner entry.

What checks are recommended after fitting?

After installation, recheck wheel alignment, steering throw, and clearance under full suspension articulation to ensure no binding and that steering geometry remains consistent.

Any specific maintenance advice?

Inspect mounting screws and threads periodically, verify there is no play at the pivot points, and confirm that the light blue finish remains intact if appearance is a concern.