Tamiya F350 HILUX Ball Bearing Set BS-HL/V1 by 3Racing  [BS-HL/V1]

Tamiya F350 HILUX Ball Bearing Set - 3RACING BS-HL/V1
Price:
USD$29.30
Brand:
3Racing
Model:
BS-HL/V1
Condition:
Brand New
Write a review

Technical bearing upgrade for F350 HILUX

This ball bearing set is supplied as 3Racing model BS-HL/V1 for installation on the Tamiya F350 HILUX platform. The set replaces factory bushings to lower rotational friction and improve drivetrain consistency during setup and tuning operations.

Installation follows established RC workshop practice: remove old bushings or bearings, inspect bores and shafts for wear, seat the replacement bearings evenly and confirm smooth free-spin prior to final assembly. Observe sealed-hub service steps where access is limited to ensure correct alignment.

From a setup perspective, bearings are a cost-effective upgrade that stabilises drivetrain losses so that changes to gear ratios, motor position or suspension settings yield more predictable results. Regular cleaning and light bearing lubrication will extend component service life and retain steady performance.

Specifications

  • Item Ball Bearing Set
  • Material Not specified
  • Model Number BS-HL/V1
  • Compatibility Tamiya F350 HILUX

Use this bearing set when the goal is to reduce drivetrain drag on a Tamiya F350 HILUX and to obtain repeatable behaviour when tuning gear and suspension settings.

What tolerance checks should I perform before fitting?

Measure bearing bores and shaft journals for roundness and correct clearance; any scoring or ovality can prevent correct seating and shorten bearing life.

How do I verify a correct press fit?

Apply even pressure to the outer race during installation and check axial runout and free-spin; uneven seating or binding indicates misalignment or contaminant in the bore.

What lubrication practice is advised?

A light application of suitable bearing oil or a thin RC-compatible grease on the races and shields is sufficient; avoid excess lubricant that can attract abrasive dust.

Will swapping bearings require suspension retune?

Because drivetrain friction changes, re-evaluate throttle feel and motor load during test runs and make minor ESC or gearing adjustments if necessary to maintain desired handling and temperature control.