TAMIYA GB-01/GB-01T Precision Front Lower Arm Aluminium GB-16/LB by 3Racing  [GB-16/LB]

Aluminium front lower suspension arm for GB-01 platforms

The GB-16/LB front lower suspension arm is an aluminium replacement engineered for use with TAMIYA GB-01 and GB-01T chassis. Supplied in an anodized light blue finish, the arm is intended to be fitted in place of the standard front lower link.

By increasing the stiffness of the lower link compared with the stock plastic component, the GB-16/LB reduces deflection under load and alters front-end compliance, producing a more immediate steering response. The part retains the original GB-01/GB-01T mounting interfaces so it integrates with existing bulkhead and steering block assemblies.

Installation follows a standard swap procedure: remove the factory lower arm, verify fit against the front bulkhead and steering hardware, then mount the aluminium arm using the original pivot pins and retainers. After fitting, confirm suspension travel and perform stepwise adjustments to damper settings and wheel geometry to achieve the desired handling balance.