Technical Rear Roller Plate M4WD-44/SG - Performance Thin Silver Carbon by 3Racing  [M4WD-44/SG]

Tamiya Mini 4WD Silver Carbon Rear Multi Roller Plate Base TZ - 3RACING M4WD-44/SG
Price:
USD$3.10
Brand:
3Racing
Model:
M4WD-44/SG
Condition:
Brand New
Write a review

Technical overview for M4WD-44/SG

The M4WD-44/SG rear multi-roller plate base is engineered as a thin silver carbon replacement for Mini 4WD TZ-style rear roller arrangements. The plate delivers a low-profile, high-stiffness mounting surface intended to reduce vertical stack while maintaining roller stability during high-speed lane transitions.

Installation notes focus on compatibility: confirm fastener thread and spacer envelope relative to your chassis geometry. Proper screw selection and spacer placement are essential to avoid point-loading at the mounting holes and to preserve plate integrity under load.

Designed for tuners and racers, this plate integrates neatly with rear roller sets and standard rear stay hardware, providing predictable behaviour during tuning and race-day adjustments.

What are the critical checks before final assembly?

Verify hole alignment, spacer stack height and screw engagement depth to ensure the plate sits flat and rollers spin freely without side load.

Recommended fastener practice?

Use screws of correct thread and length, apply light torque and consider threadlock only where vibration is likely; avoid over-tightening to prevent delamination at hole edges.

Spacer selection guidance?

Choose spacers that support the roller assembly across its bearing area to distribute load and keep the plate from flexing under lateral forces.

Surface prep for modifications or coatings?

Light abrasive scuffing and a compatible primer are advised prior to painting or adhesive application to ensure consistent adhesion on the carbon finish.